Avantone CK-7 Multi-Pattern FET Condenser Microphone
The AVANTONE Cabernet (C-series) mics from AVANT ELECTRONICS are designed to offer true professional performance. They will meet or surpass the performance and specifications of much higher priced mics.
The AVANTONE CK-7 is truly a gorgeous looking and sounding microphone. The design character and performance can be compared directly to some of the very finest FET mics?but at a fraction of their cost! Our rugged CK-7 microphone body and capsule assembly are precision machined of brass.Aesthetically it features an elegant Metallic Cabernet Wine-Red finish accented with polished nickel trim and grill. The transformer coupled Discreet Class A FET circuitry will yield pleasing professional results comparable to much more expensive designs.Any studio can proudly offer the CK-7 as a vocal mic or utility condenser due to its versatility?It exudes class visually as well as sonically. Manufactured using the finest materials yielding a very solid feel superb structural integrity and rugged reliability. The versatile CK-7 mic is able to produce professional results with a warm pleasing sonic character. The included Custom Retro Shockmount is superb in allowing a precise positioning of the mic while inhibiting the transfer of unwanted vibrations up into the mic. This isolation allows for superior professional results. 3-Pattern CLASS A FET Microphone w/ dual 35mm gold sputtered thin Mylar capsules***Kitincludes**** AVANTONE CK-7 Multi-Pattern FET Microphone* AVANTONE Custom Retro Shockmount* Elegant padded genuine wooden Mic box* Padded Aluminum storage / travel case* Owners Manual ***Uses**** Studio vocals acoustic guitar mandolin drum overheads piano room mic etc* The 3 patterns allow the CK-7 to be used in a variety of situations. The cardioid pattern is generally best used on vocals and single instruments. The omni mode works well in incorporating some room sound into the track. The figure 8 pattern allows 2 vocalists to use the mic at the same time from opposite sides.* The -10dB attenuation switch can be engaged when miking very high SPL sources to keep from overloading the electronics.* The 80Hz HIGH-PASS filter switch can be engaged to reduce rumble and to keep unwanted low frequencies from muddying up the track.**Sepcifications*** Type: True Condenser* Polar Pattern/s: Cardioid Omni Figure 8* Frequency Response: 20-20000 Hz +/- 3dB* Output Impedance: