Microphones


 


Sony MB-8N UHF Wireless microphone receiver base unit
 
Simple operation combined with compact designThe Sony MB-8N is a highly compact wireless microphone receiver base unit that offers advanced features and up to four diversity receivers in only 1U.

**Mic or Line level balanced XLR output** - The MB-806 has an individual XLR output for each receiver. The output level is selectable between Mic or Line level.**Provides 9 Volts dc for active antennas** - The MB-8N provides 9 Volts DC via the rear mounted BNC connectors to power the AN-820 active antenna system.**Internal antenna divider** - The in-built antenna divider eliminates the requirement for separate antennas for each receiver used. Allowing a 16 channel system to be operated from just two antennas.**RF input attenuation** - 0db 10db & 15db RF attenuation may be selected to provide protection of RF saturation of the receiver modules.**Quick module(WRU-8N) release** - The WRU-8N modules can quickly and easily be installed or released via front mounted screws**Compact design** - The MB-8N is a 1U 19" rack mountable base unit that allows for the insertion of up to four WRU-8N receiver modules This provides four diversity receivers in only a 1U space.**Built in antenna divider** - Built into the unit is an antenna divider which allows for a complete 16 channel system to be operated with just two antennas (AN-820).**Latest technology** - The latest technology has been incorporated into the MB-8N to ensure the best possible performance coupled with outstanding reliability**Removing the guess work** - The MB-8N will auto-assign and set-up new modules as required. Enabling the user to ensure that they are always using problem free frequencies.**Diversity reception** - Diversity offers a greater level of protection from unwanted interference and provides the optimum signal at all times.**PC control via Ethernet** - The MB-8N can be remotely controlled and monitored via Ethernet connection**Specifictions*** **Dynamic range:** 16db* **Frequency Response:** 40Hz - 20KHz* **Antenna connector:** BNC* **Audio connector:** XLR-3-32* **Network connector:** RJ-45 10Base-T* **Power requirements:** AC -100 to 240 Volts 50/60Hz: DC - 10 -24 Volts* **Power consumption:** 50W with 4 x WRU-8N installed* **Dimensions (WxHxD):** 482 x 44 x 300 MM* **Weight:** 3.7Kg**Supplied Accessories*** PC Control software* Module port covers x 3* Operation manual
 
£3649 GBPounds